According to the latest review of the plastics processing industry in Poland issued by the Applied Market Information Group (AMI), there are signs that growth in that industry may have peaked. Although there have been substantial increases in polymer consumption in Poland recently—the market is expected to have advanced by nearly half a million tonnes in the five-year period 1997-2002—rates of expansion have slowed notably in the past two years. Polish polymer demand is expected to be up no more than 5% in 2002, compared with 8% growth in 2001 and 11% in 2000.

The AMI report characterizes the Polish plastics processing industry as highly fragmented, with a large number of small, family businesses. AMI’s report details over 1,300 of the most important companies. The processes carried out by these companies are illustrated in the pie chart shown above. (Some companies carry out more than one process, so there is some double counting.)

The largest number of companies are involved in injection moulding. There has been considerable growth in this sector as foreign-owned component suppliers moved in as suppliers to automotive and appliance manufacturers.

While injection moulders are the most numerous, the largest sector of the plastics processing industry in Poland in terms of volume is film extrusion. Again, there has been increasing investment by foreign companies.

Nearly all other sectors of plastics processing have seen considerable involvement from Western-owned groups. However, while Poland has been very successful in attracting high levels of foreign direct investment (FDI)— some $7.14 billion for 2001—approximately 70% of processors identified by AMI are privately owned.

Go to https://www.hao-mold.com/ to get more informatio about injection molding cost and plastic mold making

Thinwall Injection Mould

In order to produce the new parts any sorts of machine, Moulding process is utilized. Moulding process helps to generate the strong and worthy parts easily and instantly. Bi-color injection mold is preferred by many companies, as it will produce the component in two colors. The components, which produced in this model, will be more attractive. Mostly, toys, dolls, toothbrushes, buttons, switches will be prepared using this model. Apart from Bi-color injection mold, BMC molding and thin wall Injection molding products also have more fame among the people. The important and specialty of this process exist in the selecting the color combination. If the color combination matches well, the certain product will reach the customers in large amount and its market ranges increases a lot.

BMC injection moldings products will be more strong and stable. Thus, the plastic mold components required for the transportation, sports, electrical related works are prepared using this moulding process. The materials prepared using the BMC molding process will be very flexible and they can be extended easily. BMC objects will be great in withstanding the heat for long time. Thus, electrical appliances are mostly prepared using this model, in order to get the heat withstanding capacity. BMC material will remain constant upto 130 degree of heat. Also, BMC material will not be wasted soon and they can remain for long period without any damage, if it is handled carefully. During BMC molding, the essential materials should be mixed in the perfect ratio and suitable temperature should be applied. Then only it is possible to procure the stretchy and reliable BMC materials.

Thinwall Injection Mould to make Thinwall Injection Mold molding parts, the process is not that much easy process as like other molding process. In order to generate the thin products, this molding process is utilized. Using this process, large number of components can be prepared in a short period. Mostly to produce the electronic components like mobile, laptop and computer parts, this molding process will be used.

As Chinese people prefer the plastic utensils in large amount, there is large demand for the plastic utensils in china. The thin plastic utensils are prepared using the Thinwall Injection Molding process. High speed plastic molding machines, thin wall moulds are very essential to carry out this process. Along with these parts Robot system also should be available to execute this process successfully. Robot system performs the work of lifting and placing the molded material carefully in one place.

Chinese Molding companies are very careful in producing the products using the moulding process. They incorporate the high quality materials during the moulding process to procure the quality rich products. Thus, the molding products created by the Chinese companies are very reliable and worthy. Not only they concentrate in materials to be incorporated but also they will focus on mold machine, mold design, cooling system and so on. They will pay attention on each and every thing. These reasons play an important role in delivering the Chinese molding products in market in large amount. Since, molding process is performed with help of machines; the shape of the products will be accurate.