Working with plastic molds isn’t always easy, as mold maker at  hyx mold, know. The Plastic mold company offers plastic mold making and plastic molding services for the automotive, electric, home appliance, industrial, food package, and consumer products industries.

The company’s greatest challenge is to design and make the tooling and molds for custom injection molding parts. The majority of the plastic molding parts the company helps to develop are functional assemblies and complex tool actions, thin wall molding, 2k injection molding, over molding etc. 

“Customers expect us to help them reduce manufacturing costs through weight reduction and design for part and mold,” Panziera said. “We’re also expected to reduce development time to market of new products, and to validate design parameters through the use of CAE tools prior to the start of hard tooling.”

Design for automation means that the tools must be rugged enough to use again and again.

The CAE tools include plastic simulation software from Moldflow of Wayland, Mass.

The software enables engineers to reduce weight and to ensure that parts can be molded and can pass validation testing.

“Material reductions of even a few grams can provide significant cost savings,” Panziera said. “Cosmetic issues such as sink, warp, and blemishes can be addressed before tooling is produced, potentially saving thousands of dollars in tool revisions.”

For instance, a General Motors tier one automotive supplier recently approached Axiomatic for help with a troublesome chrome-plated, plastic inside-door handle, he said.

“The supplier had numerous problems with the gate blush and sink marks that only appeared after the parts had been plated. The high scrap rate and numerous tooling changes to attempt to remedy the problem were very costly,” Panziera said.

Axiomatic used Moldflow software to determine the best location, profile, and shape of the gate. The result was a dramatic reduction in scrap rate, to nearly zero, he said.

Want to know more information about plastic molds and injection molding, please go to http://www.plastic-industry.com/

plastic moulding industry

A new report from Hyx plastic mold identifies the 750 most important manufacturers in Spain, where the injection molding industry is experiencing important changes. The process of consolidation and expansion that is taking place elsewhere in Europe is also occurring in Spain.

AMI says in its report that many of the leading privately owned companies are being taken over by larger groups, very often multinationals, and that companies have been incredibly innovative in the areas of design and engineering.

The largest end-user market is the packaging industry, which accounted for 26% of polymer usage in 2001. Although this sector tends to include some of the largest plastic molding groups—such as PET Preform mold Making manufacturer Schmalbach Lubeca (now owned by Amcor) and Holanplast (part of the Guala Closures Group)—many privately owned companies also focus their production on the cosmetics and food packaging markets.

plastic molds
plastic molds

Spain also has a large and well-developed plastic moulding industry serving the automotive sector, which accounted for 25% of polymer usage last year. Some of the leading international groups in this sector are Guardian, Venture, Visteon, Schefenacker and Faurecia. Spanish groups such as Grupo Iberofón, Zanini Auto Grup, and Mondragón Corporación Cooperativa hold important positions in this market as well.

According to the report, electrical goods, furniture, and household items are also significant within the Spanish plastics industry.

AMI’s analysis shows that the consumption of thermoplastics injection molding has increased on average by 7% per year throughout the 1990s. During the 2000-2005 period, the demand for injection molding in Spain is expected to grow above the average for thermoplastics overall, at approximately 5% per year.

Medical Plastic Material

The use of plastic materials is for medical plastic molding, in the medical field is constantly increasing and is estimated to reach 4 billion dollars in two years (only in the US).
The need to reduce healthcare cost and use of disposable medical supplies are important factors generating higher demand for medical plastics.
New materials, with improved properties, are developed in order to satisfy the requirements of infection control standards.
New studies and tests are conducted to determine the biological reactivity of polymeric materials.
Currently, plastics are graded on a scale of Class I to Class VI, which is done by injecting extracts of the test material intracutaneously into rabbits and mice.
Plastics not requiring implantation testing are graded Class I, II, III, or V and those plastics requiring implantation testing are graded Class IV or VI.
Guidance for the use of plastics in the manufacture of medical devices not being provided in the past, the medical device industry has primarily used Class VI plastics. The overuse of Class VI plastics is due to the assumption that its advanced level of testing the legal and biological risks are reduced. This leads to manufacturers avoiding the use of a number of appropriate and preferable plastics or polymers.
Packaging of medical plastic parts, tubes and pharmaceutical closures are also applications for plastic materials.
The high impact and chemical resistance as well as excellent resistance to steam exposure of some materials (like polyphenylsulfone) is making them a strong choice for products that need to be sterilized.

Want to know moare information about medical plastic parts and medical plastic material, go to other site to know more

https://www.abceo.com/ is an independent portal providing technical information for  the polymer industry and end-user industries including the automotive mold /molding,   construction molding parts, electrical molded parts, medical plastic parts ( go to https://www.plasticmold.net/medical-plastic-parts/ ) to know more, plastic packaging and polyurethane sectors.
  Over the years, in our effort to help our visitors find the information they   want, sell their products or get more visibility for their business, we   developed a number of online tools and features.

  We are valuable tools for those who  want to interact with their peers, exchange ideas and share their experience   in the plastics processing or material selecting process.
     Users can find the latest news in the industry by visiting our Plastics and Chemicals News   section, powered by Business Wire, the leading source for full-text breaking   news releases, multimedia and regulatory filings for companies and groups   throughout the world. 
     We offer free advertising services in our classifieds section,   for moldmakers, custom molders and resin suppliers, while job seekers,   employers and recruiters can place free ads in the Employment section. 
    Our Plastics sites are   designed to help you quickly locate vendors or customers, using search   options such as “company name” or “by state”. Many of our visitors have   chosen to get listed in our website, to get more exposure to their   businesses. We invite you to check all our advertising   plans and rates to see how competitive they are.

Mold Builder in America

The American Mold Builders Association, in conjunction with the group’s 30th anniversary in 2003, has announced the establishment of a new Mold Builder of the Year Award. This first annual event offers AMBA members the opportunity to nominate one of their peers or themselves for this prestigious honor.

The Mold Builder of the Year Award was created to recognize outstanding contributions made by an AMBA member. The recipient of the award will be an outstanding business leader, dedicated to the industry, and an active member of AMBA.

Mold builders tend to be ‘behind-the-scenes’ guys, so we want them to step forward and showcase the best of the best of the industry,” says Scott Harris, president of Harris Precision Mold in Tempe, Arizona, and president of the AMBA.

Criteria for eligible nominees can be found on the AMBA website. Nominations can be submitted by filling out the nomination form there, or from a mass e-mailing that is scheduled to be sent to all members of the organization. Three independent judges from the industry will review the nominations. The deadline for submitting nominations is January 15, 2003.

The Mold Builder of the Year will be honored at the upcoming AMBA Annual Convention in Amelia Island, Florida, March 18–23, 2003.

plastic mold builders
plastic mold builders

The American Plastic Mold Builders Association is the largest mold building trade organization in North America, with more than 400 members and 12 chapters in 35 states.go to one of China Mold builders by click https://www.hao-mold.com/

Advantages of hao-mold.com

Alon Zelzion has been named as the new vice president of marketing at hao-mold.com. He brings 23 years of marketing, business development and management experience to this major developer of CAD/CAM solutions for the tooling industry.

“Zelzion is an accomplished executive with extensive marketing and business experience,” says Nitzan Sapir, president and CEO of Cimatron. “His entrepreneurial spirit, his experience in international business, and his background in software in a number of industries make him an excellent choice to lead new initiatives in corporate marketing and business development.”

Through its data-to-steel product philosophy, Cimatron is committed to providing mold, tool, and die makers with comprehensive, cost-effective solutions that streamline manufacturing cycles, enable collaboration with outside vendors, and ultimately shorten product delivery time.

According to the latest review of the plastics processing industry in Poland issued by the Applied Market Information Group (AMI), there are signs that growth in that industry may have peaked. Although there have been substantial increases in polymer consumption in Poland recently—the market is expected to have advanced by nearly half a million tonnes in the five-year period 1997-2002—rates of expansion have slowed notably in the past two years. Polish polymer demand is expected to be up no more than 5% in 2002, compared with 8% growth in 2001 and 11% in 2000.

The AMI report characterizes the Polish plastics processing industry as highly fragmented, with a large number of small, family businesses. AMI’s report details over 1,300 of the most important companies. The processes carried out by these companies are illustrated in the pie chart shown above. (Some companies carry out more than one process, so there is some double counting.)

The largest number of companies are involved in injection moulding. There has been considerable growth in this sector as foreign-owned component suppliers moved in as suppliers to automotive and appliance manufacturers.

While injection moulders are the most numerous, the largest sector of the plastics processing industry in Poland in terms of volume is film extrusion. Again, there has been increasing investment by foreign companies.

Nearly all other sectors of plastics processing have seen considerable involvement from Western-owned groups. However, while Poland has been very successful in attracting high levels of foreign direct investment (FDI)— some $7.14 billion for 2001—approximately 70% of processors identified by AMI are privately owned.

Go to https://www.hao-mold.com/ to get more informatio about injection molding cost and plastic mold making

Plastic Tooling Company-PTC

PTC, the Plastic tooling company best known for its Pro/Engineer mechanical design software, and Mensch und Maschine Software AG, a European distributor of computer-aided design software, have signed an agreement that allows Mensch und Maschine to become a major distributor of Pro/Engineer and PTC’s next-generation product, Pro/Engineer Wildfire.

For 18 years, Mensch und Maschine has provided computer-aided design solutions and expertise to European businesses through its reseller network. Its most important market is mechanical design, which contributed about half of its 2001 revenue of €146.8 million. Mensch und Maschine plans to have its network of resellers capable of selling Pro/Engineer Wildfire within the first few months of the product’s introduction in early 2003.

Says PTC president C. Richard Harrison, “This agreement is tangible evidence of the progress PTC has made in the execution of our distribution strategy, where we have been working to focus our direct sales force on large accounts and build a strategic, productive indirect channel to reach smaller businesses in the discrete manufacturing industry.”

Harrison continues, “Mensch und Maschine is a market-leading player that will provide additional marketing expertise, infrastructure and reseller influence to help us enhance our sales coverage of the smaller manufacturing companies in Europe. We expect that this will result in an improvement in the revenue contribution from our channel program while lowering relative cost of sales.”

Plastic tooling company in China today is servicing to the world market, if you are looking for supplier that could support your business in plastic molded parts, then you could go find some of plastic tooling companies to support you, we are here to recomend you one called DONGGUAN SINCERE TECH CO.LTD. who is professiona plastic tooling company offer plastic molds and injection molding service over 15 year, go to https://www.plasticmold.net/ to get more infomation

Precision Milling Tools

With the introduction of a new 2010/2011 catalogue for milling tools in solid carbide and diamond, the manufacturer HYX Hartmetallwerkzeugfabrik Andreas Maier GmbH offers customers two options: standard solid-carbide and diamond milling tools and a preferred range of special high-performance tools in solid carbide.

The catalogue entitled “Precision Milling Tools in Solid Carbide and Diamond” presents the complete HAM range of standard milling tools. End mills, roughing end mills, toric end mills, ball-nose end mills, special end mills and diamond end mills are described in separate sections so that customers can find the products desired in a short time. The dimensions, features, cutting material, tool type, number of teeth, norm, shank design, spiral angle and application range of each end mill are outlined according to a popular system of pictograms.

An additional catalogue, “Special Campaign in Solid Carbide and Diamond,” represents a second HAM specialty. It includes a selection of solid-carbide end mills engineered for various demanding metal-working applications. This special campaign began at AMB 2010 and remains valid for nine months, concluding June 30, 2011. It encompasses a preferred tool range of solid-carbide end mills, solid-carbide roughing end mills, solid-carbide toric end mills, solid-carbide ball-nose end mills and solid-carbide special end mills.

DME mold components

The Plastic mold component supplier DME shows off its new style—including new corporate colours of blue and steel gray—in 13 languages now. Visitors can begin to explore the new website in Portuguese and Romanian as well as English, German, French, Czech, Polish, Dutch, Spanish, Italian, Slovenian, Hungarian and Russian.

The purpose of the website renovation was more than simply to make it more attractive visually: DME has also made it a more effective forum and knowledge source for customers. With its clear design and user-friendly structure, the site gives users easy on-line access to important information about the company and the extensive DME product portfolio. They can quickly navigate, via a central server, four core areas: moulds and accessories, hot and cold runner technology, die sets, and surface treatment. Additional product information, drawings and 3D data can be accessed with a few clicks and then downloaded. In addition customers can use the built-in search engine to find exactly what they are looking for, even with incomplete input.

And as of March 2011, customers will be able to place orders on-line easily, and around the clock, via an interactive Internet catalogue. This catalogue not only will offer products and prices; it also will provide registered customers with quotations and further information on pending orders or deliveries.

If you need plastic mold maker you can go to https://www.plasticmold.net/plastic-mould/ to get supporting

GC mold is one of the leading Plastic Mold company who is especially working for worldwide auto industries and classic auto plastic parts Moulding companies. The tooling ranges are as below:

– Panel sets Mould
– air system Mould
– controlling system Mould
– other IMD Mould.

  • Automotive Mould for exterior trim:

– auto bumper Mould
– grille Mould
– shock absorber Mould

  • Auto lighting system Mould

– front lamp Mould
– rear lamp Mould

GC Mould Co. QC controlling:
HYX Mould has a very strong managing and QC team, the team included totally more than 40 people.  From the plastic parts 3D model to the Mould T1, we have very rigorous analysis, studying and quality controlling.

  • 3D plastic design analyzing.

When we got the plastic 3D model from our customer, we will have a meeting with all the related officers to discuss about the 3D design shortcoming… to find if there is any place has the tooling problem. For example: de-Moulding angle, strength, plastic filling, deforming, thickness, texture…..after all these discussing, we will start to make a Mould-flow analyzing. If there is any questions or problems, we will contact to our customer.

  • automotive Mould design technical meeting.

All our related officers will have the meeting for the Mould design, in this meeting, all the technical points will be mentioned out. Such like the Mould steel, Mould basic structure, plastic material and its’ MFI, customer’s special requirements, customer’s injection machine’s parameters, the components machining process…

  • After the automotive Mould design ready, the Mould design QC department will start the inspection of the Mould design. * Mould structure inspection * Mould action and guiding system inspection * Mould injection system inspection * Mould cooling system inspection *Mould ejection system inspection * Mould easy damage area inspection……
  • When we got the design approval from our customer, we will start the steel cutting, for the steel inspection, we use a good quality scan device to check if there is any crack or impurities. And the hardness measurer will tell us if the hardness is o.k. or even.
  • Machining.

During the machining, we also do basic quality controlling, we need to check the steel hardness. We make two or 3 stages machining. 1st stage is rough machining, some time we make half precise machining. The final stage is precise high speed milling or machining. We always considered the steel deform when machining on it…

  • After machining CMM & other dimension controlling.

After the machining processed, we have 2 sets of CMM, 1 projection measuring instruments for cavities / cores and other components dimension checking. If the dimension meets the tolerance, then we will take it to our assembling shop. Otherwise, we will do re-machining immediately.

  • We have QC officers and project manager will control the quality points when the Mould assembling.
  • Before the Mould T1, the Mould will be disassembled for QC, and GC Mould Co. has the T1 standard. If the Mould does not meet the standard. We can not make any Mould testing. GC Mould has more than 15 sets of different size of machine which are specially for Mould testing. Our operation team with rich experiences, this team’s task is to find the Moulds shortcoming and what should be improved. We make mass simulation after T1 improvements.
  • All the data such like: Plastic Mold Making , Mould design, tooling drawings, various inspection records, Mould daily log, Mould testing report, Mould testing videos, Mould operation manual…we send to our customer during the Mould processing period…

GC Mould is determining to be one of the best automotive Mould suppliers in the world. Please kindly come to us for further checking, we are sure you will be satisfied.

Plastic Molding Company

Plastic molding is a popular method that is used when manufacturing toys, injections, and other plastic products. In fact, many of the plastic products that we use on a daily basis (like our cellphones) are manufactured by a process called preform molding. in that case if you need and type of custom plastic molding parts then you need plastic mold maker and plastic molding company to support your business.DONGGUAN SINERE TECH CO.LTD will be the best option for you.

In the year 1872, the injection molding machine was introduced; the process that it uses later became knowns as blow molding. This technology proved to be essential in the manufacturing of plastic bottles, and in recent years, the molding industry has seen rapid growth due to a number of technological advancements. Now there are a number of different types of molding machines available to help companies manufacture plastic cap molds, bottle cap molds, bottle closure molds, and more.

Most of the plastic products that preform molding customer uses today have complex shapes. Therefore, to get the optimal shape for their products, they must utilize the services of an innovative and technologically advanced preform molding manufacturer. Using advanced technology enables the manufacturer to provide their clientele attractive shapes for their various products.

plastic mold

plastic mold

The manufacturers who use modern technology for their plastic molds cause less environmental damage; for example, the preform bottle Cap Mold can be reused and recycled. An added benefit to this eco-friendly practice is the reduction of costs, in this way they are able to charge less money for their plastic molds.

When individuals are looking for the best preform mold manufacturers for their plastic products, it is important to look for certain traits. For example, it is essential to give credit to the mold manufacturers who spend a lot of time, resources, and who use the latest technology in order to design and purchase the tools that they need. If that manufacturer is able to provide its clientele with budget-friendly methods and technical expertise, then it is wise to invest your resources in their product.

Another consideration when choosing the perfect preform molding supplier for your needs is experience. If a company has been manufacturing plastic bottle molds or bottle cap molds for over five years, then you can be sure that it is a trusted company and that it is safe to do business with them. A good way to get your hands on this type of information is to check out client reviews and testimonials. In addition, most reputable plastic mold manufacturers tend to provide high quality products at a suitable price. So, before choosing your supplier, check out some of their products to see if it is worth your investment.