Tag Archive for: Aluminum Casting Alloys

A Basic Guide to Choosing Aluminum Casting Alloys Part 2

Alloys 319.0, A319.0, B319.0 & 320.0
Alloys 319.0 and A319.0 exhibit very good castability, weldability, pressure tightness and moderate strength. They are very stable alloys (i.e., their good casting and mechanical properties are not affected seriously by fluctuations in the impurity content). Alloys B319.0 and 320.0 show higher strength and hardness than 319.0 and A319.0 and are generally used with the permanent mold casting process. Characteristics other than strength and hardness are similar to those of 319.0 and A319.0. Read more

The mechanical properties of alumi- num casting alloys are obtainable only if the chemical and heat treating specifications are followed carefully. It should be noted that the properties obtained from one particular combination of casting alloy, foundry practice and thermal treatment may not necessarily be identical to those achieved with the same alloy in a different foundry or with a different thermal treating source. In all aluminum casting alloys, the percentages of alloying elements and impurities must be controlled carefully. If they are not, characteristics such as soundness, machinability, corrosion resistance and conductivity are affected adversely. Read more